Lab energy & temperature monitor
ESP32 nodes logging power draw and temperature in 3 EE labs over MQTT; spotted 2 AC units left on overnight, cutting weekly kWh by ~11%.
Each node runs on a custom two-layer board with a current transformer and a temperature sensor, and publishes a reading every 30 seconds. The dashboard showed two AC units staying on overnight; once their schedule was fixed, weekly consumption in those labs dropped by about 11%. Joud calibrated the current sensors against a reference meter and wrote the test checklist we used before every install.
الدور: Hardware & firmware lead
- ESP32
- MQTT
- الحساسات والمستشعرات
- لغة C للأنظمة المدمجة
- تصميم اللوحات المطبوعة

